In order to refinish furniture

If you have a piece of furniture that you love but that has a severely outdated look or doesn’t match the other pieces in your room, you may think your only option is to replace it. However, with a little preparation and know-how, you can easily refinish your piece to match the others.

In order to refinish furniture, you will need the proper supplies. Gather chemical strippers, rubber gloves, eye protection, a rounded-edge scraper, steel wool, water or turpentine, medium and fine grit sandpaper, tack cloth, stain,as the Texans are very similar to the 2008 Cardinals., topcoat, drop cloth, and rags or brushes.

First, you will need to remove the old stain or varnish. This should be done outdoors or in a well-ventilated room. Place the furniture on top of a drop cloth to avoid getting your products on the floor or ground. While wearing the rubber gloves and eye protection, apply the chemical stripper according to the manufacturer’s directions. You will need to let the stripper soak into the old finish to work properly-the amount of time will depend on the product and will be listed on the directions. After the required time has passed, use the scraper to begin removing the finish from your furniture. Remove as much as you can with the scraper, and get the rest off with the steel wool. Work quickly so that the stripper does not have a chance to dry out. Once the old finish is removed, clean the remaining stripper from the piece with turpentine or water, according to the manufacturer’s directions. Allow the piece to dry thoroughly.

Next, sand the piece first with medium grit sandpaper and then with the fine grit sandpaper. You should always sand with the grain of the wood,Christian Louboutin Boots cheap, not against it. This is to smooth out any imperfections in the wood and remove the last traces of the old finish from the piece. Use the tack cloth to remove all sanding dust from the furniture before going on to the next step.

Now you’re ready to apply the new stain. Follow the manufacturer’s directions for application carefully to ensure good results. Some stains may be applied with a rag while others require a brush. After applying the stain and allowing it to sit for the recommended time, wipe off the excess. You may apply multiple coats to achieve a darker color, but always allow the piece to dry between coats.

Finally, you can apply a sealer or top coat. If you chose a stain with built-in top coat, this step is not necessary. If not, you should apply the sealer in several thin coats, allowing the piece to dry between each. Use long, overlapping strokes to apply the top coat evenly for the best results. Allow the top coat to thoroughly dry before attempting to move the furniture to its proper place in your home.

For just a little time and far less money than you’d spend on a new piece of furniture, you will have a perfectly-matched item to go with your other furniture. Or if you prefer, you can refinish an entire room of furniture. Either way, you will save a lot of money and have the feeling of pride that comes with doing it yourself.